Waterjet Fine Garnet
Waterjet Fine Garnet also known as Ozonejet Garnet 80# is one of the best quality abrasive used extensively in cutting stainless steel, marbles, granite, glass, garments and other alloys.
It is widely acceptable due to its perfect balance of grain size and purity of Garnet. It is dust free with no oversize grains which allows the free flow of garnet without any blockage of the focusing tube, resulting in the low cost of production and optimum efficiency.
The edge quality and performance helps to reduce the wear and tear of the cutting head and focusing tube.
Sieve Analysis:
| US MESH | MM | Retained % | Passing % |
|---|---|---|---|
| 40 | 0.420 | 00.00 | 100.00 |
| 50 | 0.297 | 00.90 | 99.10 |
| 60 | 0.250 | 27.50 | 71.60 |
| 70 | 0.210 | 30.60 | 41.00 |
| 80 | 0.177 | 29.50 | 11.50 |
| -80 | 11.50 | 00.00 |
Specifications of Waterjet Fine Garnet
| Type | Grade | Focusing Tube | Orifice |
|---|---|---|---|
| Standard 80# Grade |
80 Mesh / 300-150 microns |
0.4" /1.02mm | 0.013-0.014"/ 0.330-0.356mm |
| High Speed Cutting Grade |
60 Mesh / 400-200 micron |
0.5" / 1.27mm | 0.014-0.018" / 0.356 - 0.457mm |
| Fine Edge Grade |
120 Mesh / 200-100 micron |
0.3" /0.76mm | 0.010 -0.011" / 0.254-0.279mm |
© 2017 Ozone Abrasives Ltd. | Powered by Zealistic Solutions